Fix Partitions logo

Fix Partitionsإصلاح الأقسام

Remove Vendor Partitionإزالة بارتشن الڤيندور

Steps to Remove Vendor Partition

Follow these steps to remove the Vendor partition and restore your Galaxy Tab A 10.1 (SM-T58X) to its original state:

  • Step 1: Format your device to avoid any issues.
  • Step 2: Download the appropriate PIT file for your device.
  • Step 3: Rename the downloaded file to gtaxllte.pit.
  • Step 4: Boot into TWRP recovery on your device.
  • Step 5: Go to Advanced and then Terminal.
  • Step 6: Place the gtaxllte.pit file in the internal storage of your device.
  • Step 7: In the terminal, type the following command:
    dd if=/sdcard/gtaxllte.pit
    of=/dev/block/mmcblk0
  • Step 8: After executing the command, reboot back into recovery.
  • Step 9: Once back in recovery, perform Format Data to remove encryption.
  • Step 10: Perform an Advanced Wipe as needed and flash your desired ROM.

Note: This process returns the partitions to their official state, which can prevent issues related to custom ROMs.

Note: If the recovery is stuck on the logo, you can also flash the PIT file directly using Odin3 on your PC in the PIT tab to solve the issue.

خطوات إزالة بارتشن الڤيندور

اتبع هذه الخطوات لإزالة بارتشن الڤيندور (Vendor) واستعادة جهاز Galaxy Tab A 10.1 (SM-T58X) إلى حالته الأصلية:

  • الخطوة 1: قم بعمل فورمات لجهازك لتجنب أي مشاكل.
  • الخطوة 2: قم بتنزيل ملف PIT المناسب لجهازك.
  • الخطوة 3: قم بتغيير اسم الملف الذي تم تنزيله إلى gtaxllte.pit.
  • الخطوة 4: قم بتشغيل الجهاز في وضع ريكڤري TWRP.
  • الخطوة 5: انتقل إلى خيارات متقدمة (Advanced) ثم التيرمنال (Terminal).
  • الخطوة 6: ضع ملف gtaxllte.pit في التخزين الداخلي لجهازك.
  • الخطوة 7: في التيرمنال، اكتب الأمر التالي:
    dd if=/sdcard/gtaxllte.pit
    of=/dev/block/mmcblk0
  • الخطوة 8: بعد تنفيذ الأمر، أعد تشغيل الجهاز إلى وضع الريكڤري مرة أخرى.
  • الخطوة 9: بمجرد العودة إلى الريكڤري، قم بإجراء فورمات البيانات (Format Data) لإزالة التشفير.
  • الخطوة 10: قم بإجراء مسح متقدم (Advanced Wipe) حسب الحاجة وقم بتثبيت الروم الذي تريده.

ملاحظة: هذه العملية تعيد الأقسام إلى حالتها الرسمية، وهذا يمنع المشاكل التي قد تحدث عند تثبيت الرومات المخصصة.

ملاحظة: إذا كان الريكڤري عالقًا علي الشعار، يمكنك أيضًا تفليش ملف PIT مباشرةً باستخدام Odin3 على جهاز الكمبيوتر الخاص بك في خانة PIT لحل تلك المشكلة.